How to connect the Keystone jack

In addition to the non-shielded Category 6 punch-down module, there is also a Category 6 punch-down module.

The wiring method is as follows:

Prepare the tools first: network cable, Category 6 module, wire cutter, wire cutter

1. Use a wire cutter to peel off the outer sheath of the network cable

2. Use pliers to cut off the anti-drawing wire and cross frame inside the network cable, and put the network cable into the dust cover slot according to the T568A/T568B sequence.

3. Put the network cable into the terminal block and press it in with a wire cutter.

4. Put on the dust cover and fix the network cable on the cable tray with a cable tie (if you choose a wireless tray, you don’t need to fix it with a cable tie)

5. Use wire cutters to cut off the excess network cable core